|
| Type |
Chucking range |
Gear ratio |
Max.min-1 |
|
AHA20 |
F5.8~20 |
1:0.81 |
3000:2430 |
| AHA25 |
F5.8~25 |
1:0.96 |
2500:2400 |
| AHD30 |
BT30 |
1:0.96 |
2500:2400 |
|
Standard Accessory
· A complete set of spanners
and wrenches
Caution
· For the shape and
mounting position of the positioning block, contact the machine manufacturer or MST.
· The machine spindle and
angle shaft
should rotate in reverse directions, so make sure the spindle rotates in the reverse direction.
Note
· The phase of the drive
key and the
positioning pin may be set freely.
· Standard specifications:
S=60 mm, 65 mm (BT40), 80 mm, 85 mm, and 110 mm (BT50).
· Products other than BT shanks
can be manufactured upon request
|
|
