Type	Chucking range	Gear ratio	Max.min-1
AHB 5	F0.5~5	1:1	5000:5000 6000:6000
AHB 7	F0.5~7
AHB 10	F2.4~10
AHC 10	F2.4~10

Standard Accessory
· A complete set of spanners and wrenches.

Caution
· For the shape and mounting position of
   the positioning block, contact the machine
   manufacturer or MST.
· The machine spindle and angle shaft should
   rotate in forward directions, so make sure
   the spindle rotates in the forward direction.

Note
· The phase of the drive key and the
   positioning pin may be set freely.
· Standard specifications: S=60 mm, 65 mm
   (BT40), 80 mm, 85 mm, and 110 mm (BT50).
· Products other than BT shanks can be manufactured upon request.