|
| Type |
Chucking range |
Gear ratio |
Max.min-1 |
|
F-AHA20 |
F5.8~20 |
1:0.81 |
3000:2430 |
| F-AHA25 |
F5.8~25 |
1:0.96 |
2500:2400 |
| F-AHD30 |
BT30 |
1:0.96 |
2500:2400 |
|
Standard Accessory
· A complete set of spanners
and wrenches
Caution
· For the shape and
mounting position of
the positioning block, contact the machine
manufacturer or MST.
· The machine spindle and
angle shaft should
rotate in forward directions, so make sure
the
spindle rotates in the forward direction.
Note
· The phase of the drive
key and the
positioning pin may be set freely.
· Standard specifications:
S=60 mm, 65 mm
(BT40), 80 mm, 85 mm, and 110 mm (BT50).
· Products other than BT
shanks can be manufactured upon request.
|
|
